How to Enter Into the Recovery Mode in POCO X3 Pro

Today you will learn how to enter into the recovery mode in POCO X3 Pro? How do I put POCO X3/POCO X3 Pro/POCO NFC/POCO GT in Recovery Mode? By using this feature, you can perform a hard reset on your smartphone, wipe cache partition, find another mode or install the software.

This mode is a menu with a lot of useful functions. Using recovery mode, you can erase all data from your phone or only wipe a cache. Be careful when you use this mode to hard reset your phone, all information, and data will be erased. So create a backup of your data before hard reset.

How do I Start POCO X3 Pro in Recovery Mode

 

Step 1: Press and keep the Power button till the device completely turns off.

Step 2: Press and hold the Power + Volume up keys.

Step 3: Only press the Power key when the logo appears.

Step 4: Choose from Reboot/Wipe data/Connect with MIAssistant.

Use Volume keys to navigate and the power button to confirm it.

How to Put POCO X3 Pro Recovery and Fast Boot Mode Using ADB Command

Step 1: Your POCO device must have a USB driver, ADB, and fast boot driver installed.

Step 2: Turn on USB Debugging on your device from the Developer Option.

Step 3: Connect you’re POCO device to the PC.

Step 4: Open CMD/PowerShell on your PC.

Step 5: Enter adb devices to make sure the computer recognizes your POCO X3 Pro.

Step 6: You will see two options

If you want to boot your device into fast boot mode, use the following command:

adb reboot bootloader

If you want to boot your device into recovery mode, use the following command:

adb reboot recovery

How do I Exit System Repair Mode on POCO X3 Pro

To exit recovery mode, use the volume up/down button to select the Reboot option, then your device will restart in normal mode.

If you have any trouble when booting your POCO X3 Pro into recovery mode, tell us in the below comment box. Which is your favorite POCO X3 Pro feature?