How to Fix Black Screen of Death Issue in Motorola Edge 30 Pro/Edge 30/Edge 20 Pro

July 9, 2022 Best Android OS

Here’s how to fix black screen of death issue in Motorola Edge 30 Pro/Edge 30/Edge 20 Pro. Term black screen of death issue originated from windows computers, they would be stuck with a blank black screen and moving cursor, but now this term is used a little differently for Android phones.

Your phone hangs more frequently, automatically reboots, consumes more power, behaves strangely, and the phone’s light keeps blinking but doesn’t respond. These symptoms could indicate a black screen of death (BSOD). BSOD can happen due to critical system error, incompatible or buggy apps or viruses, if LCD connectors are loose, overcharging for a long time, or when exposed to extreme heat. So, do you know how to Fix Motorola’s black screen of death problems?

How to Fix Black Screen Issue in Motorola Edge 30 Pro

Apply below-given possible solutions to fix Motorola edge screen block issues.

Clean your phone

Clean any debris or dirt with a small soft brush. And use a thin needle to remove stuck debris gently.

Sometimes debris can get stuck between spaces around the power button. This will result in a jammed button, and you won’t start or automatically turn on and off. Press the power button quickly and use a brush and needle if necessary so that the power button works smoothly.

Reinsert SIM and SD Card

Sometimes, if these SIM cards are not inserted correctly, it can cause compatibility issues. Remove your SIM and SD gently remove stuck debris. After this, charge your phone for some time, reinsert the cards, and then turn the phone on.

Completely Discharge your Phone

Wait until your phone’s battery is completely drained and your phone switches off automatically. Then charge your phone till the battery is 60-70%.

Force Restart Motorola Edge 30 Pro

Long-press the power button for 15 seconds. This method will fix the issue it causes due to minor glitches.

Try to Enter into Safe Mode if Working

Issues can happen if downloaded apps from 3rd party software or websites. Enable safe mode and check any third-party app causing the problems.

Step 1: Tap & hold the Power key.

Step 2: Tap & hold the Power off.

Step 3: Click on OK to enter into safe mode.

How to Factory Reset/Hard Reset Motorola Edge using Hardware Buttons

This process will remove all your phone data. Make sure back up your data before applying this.

Step 1: Press the Volume down button and Power button simultaneously until the phone turns on.

Step 2: You will enter Fast boot mode. Use Volume up and Volume down to navigate and choose Recovery mode.

Step 3: Press the Power key to select that.

Step 4: When you see an Android bot, hold the Power button and press and release the Volume up button.

Step 5: Use Volume up and Volume down as navigation keys to choose Wipe data/factory reset.

Step 6: Press the Power button to confirm it.

Step 7: Use the Volume button to select Yes, then press the Power button.

Step 8: Then, choose Reboot system now by pressing the Power button.

And that’s all. Do you know any other alternative ways to fix BDOS in Motorola Edge 30 Pro? Please share with us in below comment section.